LOW LOSS 50 OHM CABLE

 

LOW LOSS 50 OHM CABLES ARE AVAILABLE IN MANY SIZES, RANGING FROM .1” (RF100 STYLE) TO .6” (RF600 STYLE).

 

In addition, there are many larger sizes available; however they rarely are sold as connectorized cables. If you have a requirement not seen on the configurator, please call your Anixter representative.

 

Low loss cables are designed and used for wireless applications such as Cellular communications, antennae’s, access points, and mobile radio devices. 

There are 3 manufacturers of low loss cables that we supply. Unless specified, cable manufacturer may vary depending on availability at time of order

   

BELDEN	COMMSCOPE	TIMES MICROWAVE
This is our main supplier, and will be used in most PVC and PE applications.   Belden part #’s are as follows: The “A” designates PE jacket, the “R” designates PVC	Commscope carries a full line of product starting with WBC prefix that corresponds to our R###.   An “R” at the end indicates PVC.	Times Microwave’s series of Low Loss cable has an LMR prefix with the type after it that corresponds to our R###.   A “PVC” at the end designates PVC material.
R100 - 7805A and 7805R	WBC100	LMR-100
R195 - 7806A and 7806R	WBC195	LMR-195
R200 - 7807A and 7807R	WBC200	LMR-200
R240 - 7808A and 7808R	WBC240	LMR-240
R400 - 7810A and 7810R	WBC400	LMR-400
R600 - 7977A and 7977R	WBC600	LMR-600
If Belden only is a requirement, please add B after the cable designator.   (EX. R100B)	If Commscope only is a requirement, please add “C” after the cable designator.   (EX. R100C)	For Times Microwave only, please add an “L” after the designator.   (EX. R100L)