|
LMR-100
|
A 50 ohm low loss cable with a .1in diameter. Very flexible, typically used for shorter antennae run applications. This is an RG174 type cable, specifically designed for wireless applications.
Our standard cable is Belden 7805A & 7805R.
|
|
LMR-195
|
A 50 ohm low loss cable with a .195in diameter. Flexible, most common style for jumper cords. This is an RG58 type cable, specifically designed for wireless applications.
Our standard cable is Belden 7806A & 7806R.
|
|
LMR-200
|
A 50 ohm low loss cable similar to 195, except with a larger center conductor and higher braid coverage. This is also an
RG58 type cable.
Our standard cable is Belden 7807A & 7807R.
|
|
LMR-240
|
A 50 ohm low loss cable with a .24in diameter. Flexible, somewhat limited connector types available. This is an RG-8X type cable, specifically designed for wireless applications.
Our standard cable is Belden 7808A & 7808R.
|
|
LMR-400
|
A 50 ohm low loss cable with a .40in diameter. Flexible, although cables shorter than 20ft may be unwieldy. This is an RG-8 type cable, specifically designed for wireless applications. It is widely used on Cisco products for cable lengths up to 50ft.
Our standard cable is Belden 7810A & 7810R.
|
|
LMR-600
|
A 50 ohm low loss cable with a .60in diameter. Typically used for longer length jumpers, 50ft and over. This cable has limited connector options. There is no direct cross to a specific RG type for this cable.
Our standard cable is Belden 7977A & 7977R.
|